Hi,
I will try answer on yours questions.
1.) About camera. Im not test any camera with this plugin but must work all camera, capture device which use WDM drivers. So If USB camera use WDM drivers you can use it. Or If you buy one small USB capture device which use WDM drivers then you can connect to it any normal camera which use composite output. So you connect camera trought this capture device... I recomend that you use IR camera which is useable in night too...
2.) For using this plugin you need two things:
-Cisbo 323-4 Wireless LED 4 sensor kit
-USB board
Cisbo sensors box have two wire to power it, which you must connect one to groun and another to rear light. So when you put in rear gear, switch on gearbox turn your rear light up and power this Cisbo box. Then USB board detect turned on sensors box and send signals to plugin. You can select distance which must be reached to auto open/show plugin. So you can have your Cisbo box power all time and check distance by pressing PDC button in main menu, or if distance is reached then auto show it... So If you set this distance to 0 then plugin never automatic open/show and you must open it manualy...
This is useable if you use two device one for front and other for rear sensors and you don't want automatic show plugin for front sensors then you set this value to 0.. If you want use rear normaly and for front you want disable auto show option you must manualy edit config file. Example:
Code:
<DISTSHOWREAR>225</DISTSHOWREAR>
<DISTSHOWFRONT>0</DISTSHOWFRONT>
If you have more questions just ask and I will try answer...