|
I've attached the wiring information from my manual and the schematic I sketched up when I was planning (sorry for the crappy cell phone pic. It's all I have available right now). I think I ended up using different resistors in the end but this is the basic idea. Depending on the resistance values you're getting from the two wires, you may not need two resistors (or maybe any resistors). Since my two lines used the same resistances, I needed at least one resistor. The second resistor on the other line it made it easier for wiring/soldering. If the resistances on the button pushes are all different, you may be able to just tie the lines together.
|