Cannot Reproduce: Standard - Settings - Shell mode doesn't always work

[fatejd]

Please give a brief description of the issue here

Shell mode doesn't always work

Which product are you experiencing this problem with

Standard

What version of Centrafuse are you running

2.0 Release (don't remember the buld number)

What module in Centrafuse are you experiencing this issue in

Settings

Are you able to reproduce this bug at will

Yes

What were you doing when you encountered the bug

This happens after setting CF to act as system shell. It works the first time, but then after shutdown and start up of the PC, it boots into Windows. I have to first start GPSTool (or whatever it is called) to start the GPS, then CF. I can change the setting back, save, restart and change it again to act as system shell and it will work again ONCE.

Are the PC specs under your user name the same as the system you are reporting this bug for

Yes

If you answerd 'No' above, then please detail your system here

[David]

just tested this on the build we have here and had no issues...

if you set Centrafuse as system shell and reboot, Centrafuse should load as the system shell...

if you minimize, or exit Centrafuse, Explorer will load... If you then restart Centrafuse it will close Explorer... If you hit the power button, Centrafuse will close and should be the shell when it restarts...

if you need to have something load at startup before Centrafuse, place it in the Run section of the registry, or in the Windows Startup folder, or use the Centrafuse startup shutdown commands...

if you still have issues, please enable logging, search the FAQ, and reproduce the error, and create a system report and post it so we can see if we notice anything...

also make sure you are running the final 806 version of 2.0, you can determine this by going to Tools, System Information...

david