Sirius SC-C1 USB

davidj2k · April 18th, 2009, 02:04 PM

I have installed the Sirius SC-C1 USB device...and launched the Sirius Demo application...it is able to download all the channels from Sirius, however when I try to see it in Centrafuse there are no channels listed, I believe I have setup all the settings correctly, but it still is not loading the Sirius channels. Can anyone explain to me what the proper settings are for this setup or why it is doing this?

Salmizar · April 18th, 2009, 05:34 PM

You don't even get a channel listing? If so, then you didn't pick the correct port. Go back in and review the port, you should see one listed that says MJS in it. If there is none review the usb ports from your device manager. One will be listed with MJS in it. Select that port in the settings.

davidj2k · April 18th, 2009, 06:41 PM

it is on the correct com port, i checked that first
Posted via Mobile Device

Salmizar · April 18th, 2009, 07:46 PM

I have the same device you speak of and never had this problem. So I have to assume the problems in the setup, rather then the device. I could continue asking you each setting, or you could just specify them all here

Stupid obvious question here, but you don't have the demo program open when running CF do you?

Scott · April 19th, 2009, 01:37 PM

yeah this should work without issue, sirius module has been in a stable state for over a year now...
another thing to try is to click the "0/0" label in the satradio listview (the listcount label). It will restart the radio and attempt to refresh the channel list...

davidj2k · April 20th, 2009, 12:14 PM

No, the demo software is not running, however if I try to open it while CF is running it is unable to retrieve the stations, if I close CF it works fine. I clicked on the "0/0" label and received "An error occurred", I then looked at the error.log for CF and saw there was an error something about a string, I cannot remember exactly but if you want me to post the log I can, I just need to go out to my car to get it.

davidj2k · April 20th, 2009, 12:32 PM

here are my settings

Device: SiriusSC-C1
Record Line In Device: None
Playback Line In Device: None
Port: MJS Sirius Interface (COM6)
Buffer Sat Radio: ON
Log Events: ON
Posted via Mobile Device

davidj2k · April 20th, 2009, 12:38 PM

here is the error message

Input String was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at SatRadio.Satradio.CF_PluginShowSetup()
Posted via Mobile Device

Salmizar · April 20th, 2009, 04:32 PM

Select your line in on your sound card for recording device if that's where you put it. You need to select a record in if you have buffering enabled. Even when that set to none, I believe you should at least get the channel listings. So I am not sure this is the source of your channel listing problem.

I would recommend posting a system port though.

davidj2k · April 27th, 2009, 12:30 AM

Ok, I set the Playback Line In Device, to the Line In on my sound card, but Record Line In is still set to None, now the list will populate with all the channels but there is no sound, I have checked the sound settings to make sure the Line In was not muted, it was then I unmuted it and it still does not play anything, I tried several different settings for the Line In Devices and still hasn't worked, could somebody give me an example of how they have their settings in CF? Is there something I am suppose to do on the sound card?